DJI T60

描述

Technical Parameters
Aircraft Parameters
Total Weight
46 kg (without battery)
62 kg (with battery)
Maximum Take-off Weight[1]
Maximum Spraying Take-off Weight: 112 kg (standard 2 nozzles + 50 L work box, near sea level)
Maximum Spraying Take-off Weight: 123.5 kg (optional fruit tree kit, 2 nozzles, near sea level)
Maximum Seeding Take-off Weight: 125 kg (near sea level)
Maximum Wheelbase
2270 mm
Dimensions
Spraying:
Arm unfolded, propellers unfolded: 2870*3295*900 mm
Arm unfolded, propellers folded: 1650*2035*900 mm
Arm folded, propellers folded: 1100*900*900 mm
Seeding:
Arm unfolded, propellers unfolded: 2870*3295*900 mm
Arm unfolded, propellers folded: 1650*2035*900 mm
Arm folded, propellers folded: 1100*900*900 mm
Hovering accuracy (GNSS signal is good)
RTK positioning enabled:
1 cm +1 ppm (horizontal)
1.5 cm +1 ppm (vertical)
1 ppm: For every 1 km between the aircraft and the base station, the accuracy deteriorates by 1 mm. For example, if the aircraft is 1 km away from the base station, the accuracy is 1.1 cm.
Without RTK positioning:
Horizontal ±60 cm, vertical ±30 cm
Maximum flight radius that can be set
2 km
Working environment temperature
0 ℃ to 40 ℃
Maximum wind speed that can be tolerated
Level 3 wind (<6 m/s)
Power system – motor
Stator size
140×28 mm
Motor KV value
83 rpm
Power system – propeller
Material
Nylon carbon fiber
Diameter
56 inches
Number of rotors
4
Spraying system – water tank
Material
Plastic (HDPE)
Work tank volume
50 L
Work load
50 KG
Spraying system – nozzle
Nozzle model
LX07550SX/LX08550SX (optional)
Number of nozzles
Standard 2
Nozzle spacing
1765 mm (rear spray bar)
Atomization particle size
50-500 μm / 20-320 μm
Effective spray width range [2]
4-11 m (relative working height 3 m)
Spraying system – water pump
Water pump type
Impeller pump (magnetic drive)
Number of water pumps
2
Maximum flow rate
18 L/min (2 nozzles)
28 L/min (4 nozzles)
Spreading system
Applicable materials
Particle size 0.5-10 mm
Volume of spreading operation box
80 L
Spreader structure
Centrifugal spinner
Discharger structure
Auger feeding
Maximum discharge volume
190 kg/min (compound fertilizer)
Maximum load inside spreading operation box
60 kg
Effective sowing width [3]
Range: 3-8 m
Safety system 3.0
Phase array radar EIRP
<20 dBm (NCC/MIC/KC/CE/FCC)
Working environment temperature
0 ℃ to 40 ℃;
Working environment requirements
Normal light intensity, rich scene texture features, no dirt.
Operating frequency
Phase array radar: 24.05-24.25 GHz (NCC/FCC/MIC/KC/CE)
Operating power consumption
Front active phased array radar: 23 W
Rear active phased array radar: 18 W
FOV
Front phased array digital radar: horizontal 360°, vertical ± 45°, top ± 45° (cone)
Rear phased array digital radar: vertical 360°, horizontal ± 45°
Tri-vision system: horizontal 90°, vertical 180°
Range[4]
60 m
Effective safe obstacle avoidance speed[5]
<=13.8 m/s
Effective obstacle avoidance height
>=1.5 m
DJI RC Plus 2
Model
TKPL 2
Display
7-inch touch LCD display, resolution 1920*1200, brightness 1400cd/m2
Storage temperature
-30 ℃ to 45℃ (within one month)
-30℃ to 35℃ (greater than one month but less than three months)
-30℃ to 30℃ (greater than three months but less than one year)
Charging environment temperature
5℃ to 40℃
Built-in battery life
3.8 hours
External battery life
3.2 hours
Charging method
Use a USB-C fast charger with a maximum power of 65W (maximum voltage 20V). DJI portable charger is recommended
Charging time
Both built-in and built-in plus external batteries take 2 hours (charge according to the official charging method when powered off)
DB2100 Intelligent Flight Battery
Model
BAX801-40000mAh-52.22V
Weight
Approximately 16 kg
Capacity
40000 mAh
Voltage
52.22 V
D12500iE All-purpose variable frequency charging station
Output channel
1. DC charging output 42-59.92V/9650W
2. Air-cooled radiator power supply 12V/6A
3. AC output 220V/1500W
Battery full charge time[6]
11-12 minutes to fully charge a battery (DB2100 intelligent flight battery, 15% ~ 95% power)
Fuel tank capacity
30 L
Starting method
One-button start
Operating temperature
0 ℃ to 40 ℃
Oil capacity
1.1 L
Applicable battery
DB2100 intelligent flight battery
Dimensions
757×704×677 mm
Weight
85.5 ± 0.5 kg
Fuel type
92# gasoline or above
Reference fuel consumption
500 ml/kWh
Oil model
SJ10W-40
C10000P Intelligent charger
Charger model
CSX801-10000
Dimensions
400×266×120 mm
Weight
Approximately 12.7 kg
Input voltage
Three-phase AC input: 380 V
Single-phase AC input: 220 V
Output voltage
42-59.92 V
Rated output current
160 A
Rated power
9650W (three-phase 380V input)
3000W (single-phase 220V input)
Charging time[6]
11-12 minutes to fully charge a battery (DB2100 intelligent flight battery, 15% ~ 95% power)
Protection function
Over-temperature, over-voltage, under-voltage, short circuit, fan stall and other protection functions
Working environment temperature
0 ℃ – 40 ℃
Output channel
1
Applicable intelligent flight battery
DB2100 intelligent flight battery
4G enhanced image transmission
Dongle Model
IG831T
Technical Standard
TDD-LTE/FDD-LTE/WCDMA
Interface
USB-C interface, nano-SIM card interface, TS-5 antenna interface
Antenna
Dual antenna
Dimensions
43.5 mm * 23.0 mm * 7.0 mm
Weight
Approximately 11.5 g
Operating Voltage and Current
5 V, 1 A
Notes
[1] Measured at sea level. The DJI Agriculture App will intelligently recommend the loading weight based on the current aircraft status, environmental conditions and operation tasks. The maximum weight of the material loaded by the user should not exceed the recommended value, otherwise it may affect flight safety.
[2] The effective spraying range of the spraying system depends on the actual operation scenario.
[3] The effective spraying range is the data measured at a flight altitude of 3 m. The actual operation is related to the spinner speed, material type, material per mu, and on-site environment.
[4] The observation distance of Safety System 3.0 will vary due to ambient light, rain and fog, and the material, position, and shape of the target object.
[5] Except for linear obstacle scenarios, if the aircraft is damaged due to obstacle avoidance failure within 13.8 m/s, free warranty can be provided through log analysis; for linear obstacle scenarios, if the aircraft is damaged due to obstacle avoidance failure within 7 m/s, free warranty can be provided through log analysis; to ensure operational safety, it is recommended to circle wires, diagonal wires, etc. as obstacles.
[6] The battery cell temperature supports fast charging within the range of 15°C to 70°C; the charging time varies due to factors such as input power, altitude, and initial charge amount.